Europlex   Europlex   Intrusion and Fire Detection   SigNET   3GS   SuiteSecure  Access Control  3GS  VeriNET  Communications Equipment   eCOM IP Receiver   CiTeC  Legacy Products   Aplex    Directplex   DVACs Receiver Aplex Product Line Aplex 3100E   General Information
The Model 3100E APLEX control panel contains the latest in microprocessor technology to monitor up to 100 zones of protection. Time-division multiplexing is used to interrogate each protection point on a 3-conductor cable up to 2 km in length. Multiplexing makes the installation easier because no "home-run" loops are required. Additional zones may be added later by tapping in on the multiplex line.

• Specifications
  
• 100-zone capacity
  
• 2-km, fully supervised, multiplex loop
  
• 600-event log with date and time of event including user action and user name
  
• 250 user codes plus names (Users can only select options assigned to them by the master user)
  
• 24 factory-defined zone types, e.g. exit, panic, twin, follower, fire-door, flow, gate, pressure, night, etc.
  
• Retard timer on flow-type zones
  
• Closing time warning with user choice closing times
  
• Simple door access, user group split into 5 blocks, each block can operate one of five doors
  
• ULC listed for Central/Monitoring Station Burglary and/or Fire, suitable for financial-type burglar alarm system

Aplex 3100E8

Aplex Multi-area System 3100E8
This multi-area system is based on the standard APLEX 100-zone panel. The system allows for the splitting up of a premises into a maximum of eight areas and permits individual arming and disarming of each area. In addition, a common area can also be protected, e.g., cafeteria, lobby, etc. When any one area is disarmed, the common area is disarmed; however, when all areas are armed, the common area is also armed.

All eight areas and the common area each have an instant zone type. In addition, Areas 1 to 4 have individual entry/exit zones and Areas 1 and 2 each have a follower type zone. This allows timed entry/exit for authorized users of Areas 1 to 4. The common area also has an entry/exit zone type that permits monitoring a lobby.

The 250 general users can be assigned to arm/disarm different areas. Selected users can also fully arm or disarm the complete system and be given further options such as reviewing the 600-event log, shunting zones, etc.

In operation, the area designations are factory programmed to read AREA 1, AREA 2, etc. This titling can be changed to read OFFICE, PLANT, STORES, or any suitable six-character designation.

Aplex 3030E

  General Information
The Model 3030E APLEX control panel contains the latest in microprocessor technology to monitor up to 30 zones of protection. Time-division multiplexing is used to interrogate each protection point on a 3-conductor cable up to 2 km in length. Multiplexing makes the installation easier because no "home-run" loops are required. Additional zones may be added later by tapping in on the multiplex line.
Aplex 3030 PCB Commercial Building

• Specifications
  
• 30-zone capacity
• 2-km, fully supervised, multiplex loop
• 300-event log with date and time of event including user action and user name
• 99 user codes plus names (Users can only select options assigned to them by the master user)
• 24 factory-defined zone types, e.g. exit, panic, twin, follower, fire-door, flow, gate, pressure, night, etc.
• Retard timer on flow-type zones
• Closing time warning with user choice closing times
• ULC listed for Central/Monitoring Station Burglary and/or Fire, suitable for financial-type burglar alarm systems

Aplex 3030E8

Aplex Multi-area System 3030E8
This multi-area system is based on the standard APLEX 30-zone panel. The system allows for the splitting up of a premises into a maximum of eight areas and permits individual arming and disarming of each area. In addition, a common area can also be protected, e.g. cafeteria, lobby, etc. When any one area is disarmed, the common area is disarmed; however, when all areas are armed, the common are is also armed.

All eight areas and the common area each have an instant zone type. In addition, Areas 1 to 4 have individual entry/exit zones and Areas 1 and 2 each have a follower type zone. This allows timed entry/exit for authorized users of Areas 1 to 4. The common area also has an entry/exit zone type that permits monitoring a lobby.

The 99 general users can be assigned to arm/disarm different areas. Selected users can also fully arm or disarm the complete system and be given further options such as reviewing the 300-event log, shunting zones, etc.

In operation, the area designations are factory programmed to read AREA 1, AREA 2, etc., or can be changed to read OFFICE, PLANT, STORES, etc. , or any suitable six-character designation.

Related Links

CiTeC

eCOM

SEARCH